===== Polyurethane Bushings =====
==== Main Bushing Kit ====
The main Z31 bushing kit is produced by Prothane and was created with the help of Z31 owners and Motorsport Auto. The kit number is 14-2004.
Parts included in the kit:
^  Comp. Num.  ^ Description  ^  Qty  ^ Location  ^
|  14-1109  | 280/300ZX FT S/B Kit 79-89 22MM  |  1 KIT | 22mm anti-sway bar - Front |
|  14-1110  | 280/300ZX FT S/B Kit 79-89 23MM  |  1 KIT | 23mm anti-sway bar - Front  |
|  14-1111  | 300ZX FT S/B Kit 84-89 24MM  |  1 KIT | 24mm anti-sway bar - Front  |
|  14-1112  | 300ZX RR S/B Kit 84-89 22MM  |  1 KIT | 22mm anti-sway bar - Rear  |
|  14-1113  | 300ZX RR S/B Kit 84-89 23MM  |  1 KIT | 23mm anti-sway bar - Rear  |
|  14-1114  | 300ZX RR S/B Kit 84-89 26MM  |  1 KIT | 26mm anti-sway bar - Rear  |
|  14-1203  | STRUT ROD KIT 300ZX 84-7/87  |  1 KIT | Tension rod support bushings - 1984-1987 models  |
|  14-1204  | STRUT ROD KIT 300ZX 8/87-89  |  1 KIT | Tension rod support bushings - 1988-1989 models  |
|  14-206  | 300ZX FT LWR C-ARM BSH KIT 84-89  |  1 KIT | Front control arm bushings  |
|  14-303  | 300ZX RR LWR C-ARM BSH KIT 84-89  |  1 KIT | Rear control arm bushings  |
|  19-1714  | TIE ROD END BOOTS .650"X1.625"  |  1 KIT | Tie rod end link bushings  |
|  19-401  | END LINK SET 2 3/8" MOUNTING LENGTH  |  1 SET | Front anti-sway bar end links - 84-86 (bushings can be used for lower half of 87-89 end links)  |
|  19-408  | END LINK SET 4 1/4" MOUNTING LENGTH  |  1 SET | Rear anti-sway bar end links  |
* You will NOT use all of the bushings above in your Z31. There will be left over parts. This is normal.

==== Crossmember Bushings ====
These are NOT part of the master kit listed above. They are separate parts. The kit number is 23-4148