Subject: sensor light reset
: Sensor light just came on! 100000 miles ... Where is the reset? Thanks guys!
Remove the glovebox as follows:
Drop the glovebox door by pressing in the sides releasing the door stops from their holes.
Remove the screws (4 trim/2 latch).
Pull the box out and lower it out of the way.
At the top of the glovebox frame slightly to the left locate a relay. On the right side of the relay you'll feel a rubber-covered button/plunger. Press it in and you'll hear the relay spring reset. Turn the ignition switch on, the sensor light should be off.
Reassemble.
Enjoy the ride!
© z31.com 1994-2010. All rights reserved.
